ServersCheck 300505785 Digital shock sensor
- Home
- DCIM
- Environment Monitoring
- ServersCheck 300505785 Digital shock sensor
The ServersCheck vibration and shock sensors are designed for 2 main purposes:
1) detect and record tampering, moving, removal or installation of equipment inside racks
2) detect and record vibration or shock inside rooms especially for sensitive equipment such as traditional hard disks
Different manufacturers offer vibration sensors that are analog based: an alert will be triggered if motion has been detected. Unlike those sensors, ServersCheck's shock and vibration sensor will report the actual force being recorded. This multi-axis G force allows to detect accurately the level of vibration and also allows you to define the exact threshold you want to be alerted on.
The sensors can be used in data centers, server rooms, racks, telecom equipment rooms or any other location where you want to monitor and record the level of shock or vibration. Like all other ServersCheck sensors, this sensor can be queried over SNMP by any network monitoring system such as ServersCheck's own Monitoring Software.
- Vibration unit: G force
- Minimum value: 1G
- Sensor precision:
- Dimensions: 74 mm (2.9") x 66 mm (2.59") x 22 mm (0.8")
- Housing: Orange metal case with status led
- 0U Rack mountable
- Connects via included 50cm/1.6ft regular RJ45 cable to SensorGateway (up to 10m/33ft supported between probe and SensorGateway)
- The probe requires the SensorGateway v4 or higher to operate
- The sensor probe connects to and is managed through the connected SensorGateway (v5)
- Communication protocols to probe through SensorGateway: SNMPv2,v3 and HTTP
- Connects via regular straight RJ45 cable to the SensorGateway. Maxmimum distance between probe and SensorGateway is 10m/33ft
Vibration unit: G force |
Minimum value: 1G |
Sensor precision: |
Dimensions: 74 mm (2.9") x 66 mm (2.59") x 22 mm (0.8") |
Housing: Orange metal case with status led |
0U Rack mountable |
Connects via included 50cm/1.6ft regular RJ45 cable to SensorGateway (up to 10m/33ft supported between probe and SensorGateway) |
The probe requires the SensorGateway v4 or higher to operate |
Write Your Own Review
The ServersCheck vibration and shock sensors are designed for 2 main purposes:
1) detect and record tampering, moving, removal or installation of equipment inside racks
2) detect and record vibration or shock inside rooms especially for sensitive equipment such as traditional hard disks
Different manufacturers offer vibration sensors that are analog based: an alert will be triggered if motion has been detected. Unlike those sensors, ServersCheck's shock and vibration sensor will report the actual force being recorded. This multi-axis G force allows to detect accurately the level of vibration and also allows you to define the exact threshold you want to be alerted on.
The sensors can be used in data centers, server rooms, racks, telecom equipment rooms or any other location where you want to monitor and record the level of shock or vibration. Like all other ServersCheck sensors, this sensor can be queried over SNMP by any network monitoring system such as ServersCheck's own Monitoring Software.
- Vibration unit: G force
- Minimum value: 1G
- Sensor precision:
- Dimensions: 74 mm (2.9") x 66 mm (2.59") x 22 mm (0.8")
- Housing: Orange metal case with status led
- 0U Rack mountable
- Connects via included 50cm/1.6ft regular RJ45 cable to SensorGateway (up to 10m/33ft supported between probe and SensorGateway)
- The probe requires the SensorGateway v4 or higher to operate
- The sensor probe connects to and is managed through the connected SensorGateway (v5)
- Communication protocols to probe through SensorGateway: SNMPv2,v3 and HTTP
- Connects via regular straight RJ45 cable to the SensorGateway. Maxmimum distance between probe and SensorGateway is 10m/33ft
Vibration unit: G force |
Minimum value: 1G |
Sensor precision: |
Dimensions: 74 mm (2.9") x 66 mm (2.59") x 22 mm (0.8") |
Housing: Orange metal case with status led |
0U Rack mountable |
Connects via included 50cm/1.6ft regular RJ45 cable to SensorGateway (up to 10m/33ft supported between probe and SensorGateway) |
The probe requires the SensorGateway v4 or higher to operate |
Write Your Own Review
The ServersCheck vibration and shock sensors are designed for 2 main purposes:
1) detect and record tampering, moving, removal or installation of equipment inside racks
2) detect and record vibration or shock inside rooms especially for sensitive equipment such as traditional hard disks
Different manufacturers offer vibration sensors that are analog based: an alert will be triggered if motion has been detected. Unlike those sensors, ServersCheck's shock and vibration sensor will report the actual force being recorded. This multi-axis G force allows to detect accurately the level of vibration and also allows you to define the exact threshold you want to be alerted on.
The sensors can be used in data centers, server rooms, racks, telecom equipment rooms or any other location where you want to monitor and record the level of shock or vibration. Like all other ServersCheck sensors, this sensor can be queried over SNMP by any network monitoring system such as ServersCheck's own Monitoring Software.
- Vibration unit: G force
- Minimum value: 1G
- Sensor precision:
- Dimensions: 74 mm (2.9") x 66 mm (2.59") x 22 mm (0.8")
- Housing: Orange metal case with status led
- 0U Rack mountable
- Connects via included 50cm/1.6ft regular RJ45 cable to SensorGateway (up to 10m/33ft supported between probe and SensorGateway)
- The probe requires the SensorGateway v4 or higher to operate
- The sensor probe connects to and is managed through the connected SensorGateway (v5)
- Communication protocols to probe through SensorGateway: SNMPv2,v3 and HTTP
- Connects via regular straight RJ45 cable to the SensorGateway. Maxmimum distance between probe and SensorGateway is 10m/33ft
Vibration unit: G force |
Minimum value: 1G |
Sensor precision: |
Dimensions: 74 mm (2.9") x 66 mm (2.59") x 22 mm (0.8") |
Housing: Orange metal case with status led |
0U Rack mountable |
Connects via included 50cm/1.6ft regular RJ45 cable to SensorGateway (up to 10m/33ft supported between probe and SensorGateway) |
The probe requires the SensorGateway v4 or higher to operate |
Write Your Own Review
Related Products By Brand
Our site uses cookies and other technologies in order to optimize the website and for continuous improvement.
You agree to the usage of cookies when you continue using this site. For more information visit our privacy policy.
