Serverscheck 179997 Power Failure Sensor
- Home
- DCIM
- Environment Monitoring
- Serverscheck 179997 Power Failure Sensor
Introducing the ServersCheck Mobile SensorGateway, the wireless base unit
designed for monitoring remote infrastructure sites. Features: support for 2G/3G/4G*, built-in temperature sensor, web server (HTTP or HTTPS), alerting via email, SMS via SIM card, SNMP v1,v2 &v3 agent, XML output & more.The world's first LTE enabled infrastructure monitoring unit with triple network redundancy for secure remote connectivity.
- It's ultra connected: 2G, 3G and 4G!
when monitoring remote sites, it's all about connectivity. When you have a wired IP network, it will use the mobile network as a backup. No wired IP network? This device has got you covered with its mobile support.To keep your remote sites safe, it does not accept any incoming data connections over the mobile phone network.By supporting 2G, 3G and 4G, it has a triple fail-over built-in so that if one network fails, it automatically tries the other network.
- PINGs the network
using the new PING check type, the device will monitor the wired IP connectivity. If that fails, then it will generate an alert using the mobile phone network so that you know that the IP connectivity with your remote site is lost.With its output features, it doesn't stop at the alerting level. It can also trigger output controls such as a power cycle of a router. This allows you to have it automatically try to restore your IP link.
- Web server for easy administration
the unit has a built-in web server that you can access to configure, read sensor data, define alerts and more.
- Alerting via email, SMS or voice call
want to be alerted when thresholds are exceeded? the device can itself send out alerts via email, SMS or voice call alert.Emails can be configured to be sent through your mail server or public mail servers like Gmail. SMS & Voice call alerts are sent through our gateway. Credits are included in the Premium plans.
- SNMP ready with built-in SNMP agent
supports SNMP v2 & v3 with following SNMP commands:GET, GETNEXT, SET, WALK & TRAPSThis feature allowsyou to integrate the devices with any SNMP or DCIM software
- SaaS: cloud based monitoring
monitor, report & alert on your sensors from our cloud based Software-As-A-Service platform .
- Supports up to 2 external probes or up to 8 with optional sensor hub
- Compatible with many monitoring tools
using SNMP the sensorgateway can be integrated with many different tools such as Schneider, Emerson, IO, Nlyte, iTracs, HP OpenView, IBM Tivoli, CA, BMC, IO, Modius, MRTG, Cacti, Nagios, Zenoss, ManageEngine, Ipswitch WhatsUp, Paessler PRTG, Solarwinds & more.
- ServersCheck Monitoring software
the free ServersCheck Monitoring Software enables you to centrally monitor, report and alert on sensor values. it offers advanced monitoring capabilities based on heatmaps - those heatmaps will plot sensor readings on your data center or server room floor plan.
- GSM Mobile frequencies:
GSM | GPRS | EDGE : 850 , 900 , 1800 , 1900 MHz
UMTS|HSPA+ : 900, 1800, 2100 MHz
LTE : 800, 900, 1800, 2100, 2600 MHz
Mobile Certification: CE, GCF
Market: Europe, Middle-East, Africa, Asia, Pacific (for EU frequencies only)
CDMA is not supported.
Operating temperature range: 0°C to +75°C (+167°F)
Operating humidity range: < 90% rH (non-condensating)
Dimensions: 70 mm (2.7") x 88 mm (3.4") x 33 mm (1.4")
TCP/IP: IPv4 at 10/100 Mbps
Power Source: PoE: IEEE 802.3af
Power Usage: 1500mW (without sensors attached)
Built-in: web server, SNMP v1, v2 & v3 (MD5/AES)
Built-in alerting options: email SMS (over IP) & SNMP Traps
External sensors probes: 2 sensor probes through straight RJ45 cable with max distance of 10m or 30ft
Max distance to switch: depending on cable quality up to 100m / 300ft
- Built-in Temperature Sensor:
Temperature Resolution: 0.1°C / 0.18°F
Temperature Reading: -55°C to +125°C (-67°F to +257°F) / SensorGateway operates up to 75°C
Temperature Accuracy: +/- 1°C (+/- 2°F) over 0°C to +75°C / 32°F to 167°F
Write Your Own Review
Introducing the ServersCheck Mobile SensorGateway, the wireless base unit
designed for monitoring remote infrastructure sites. Features: support for 2G/3G/4G*, built-in temperature sensor, web server (HTTP or HTTPS), alerting via email, SMS via SIM card, SNMP v1,v2 &v3 agent, XML output & more.The world's first LTE enabled infrastructure monitoring unit with triple network redundancy for secure remote connectivity.
- It's ultra connected: 2G, 3G and 4G!
when monitoring remote sites, it's all about connectivity. When you have a wired IP network, it will use the mobile network as a backup. No wired IP network? This device has got you covered with its mobile support.To keep your remote sites safe, it does not accept any incoming data connections over the mobile phone network.By supporting 2G, 3G and 4G, it has a triple fail-over built-in so that if one network fails, it automatically tries the other network.
- PINGs the network
using the new PING check type, the device will monitor the wired IP connectivity. If that fails, then it will generate an alert using the mobile phone network so that you know that the IP connectivity with your remote site is lost.With its output features, it doesn't stop at the alerting level. It can also trigger output controls such as a power cycle of a router. This allows you to have it automatically try to restore your IP link.
- Web server for easy administration
the unit has a built-in web server that you can access to configure, read sensor data, define alerts and more.
- Alerting via email, SMS or voice call
want to be alerted when thresholds are exceeded? the device can itself send out alerts via email, SMS or voice call alert.Emails can be configured to be sent through your mail server or public mail servers like Gmail. SMS & Voice call alerts are sent through our gateway. Credits are included in the Premium plans.
- SNMP ready with built-in SNMP agent
supports SNMP v2 & v3 with following SNMP commands:GET, GETNEXT, SET, WALK & TRAPSThis feature allowsyou to integrate the devices with any SNMP or DCIM software
- SaaS: cloud based monitoring
monitor, report & alert on your sensors from our cloud based Software-As-A-Service platform .
- Supports up to 2 external probes or up to 8 with optional sensor hub
- Compatible with many monitoring tools
using SNMP the sensorgateway can be integrated with many different tools such as Schneider, Emerson, IO, Nlyte, iTracs, HP OpenView, IBM Tivoli, CA, BMC, IO, Modius, MRTG, Cacti, Nagios, Zenoss, ManageEngine, Ipswitch WhatsUp, Paessler PRTG, Solarwinds & more.
- ServersCheck Monitoring software
the free ServersCheck Monitoring Software enables you to centrally monitor, report and alert on sensor values. it offers advanced monitoring capabilities based on heatmaps - those heatmaps will plot sensor readings on your data center or server room floor plan.
- GSM Mobile frequencies:
GSM | GPRS | EDGE : 850 , 900 , 1800 , 1900 MHz
UMTS|HSPA+ : 900, 1800, 2100 MHz
LTE : 800, 900, 1800, 2100, 2600 MHz
Mobile Certification: CE, GCF
Market: Europe, Middle-East, Africa, Asia, Pacific (for EU frequencies only)
CDMA is not supported.
Operating temperature range: 0°C to +75°C (+167°F)
Operating humidity range: < 90% rH (non-condensating)
Dimensions: 70 mm (2.7") x 88 mm (3.4") x 33 mm (1.4")
TCP/IP: IPv4 at 10/100 Mbps
Power Source: PoE: IEEE 802.3af
Power Usage: 1500mW (without sensors attached)
Built-in: web server, SNMP v1, v2 & v3 (MD5/AES)
Built-in alerting options: email SMS (over IP) & SNMP Traps
External sensors probes: 2 sensor probes through straight RJ45 cable with max distance of 10m or 30ft
Max distance to switch: depending on cable quality up to 100m / 300ft
- Built-in Temperature Sensor:
Temperature Resolution: 0.1°C / 0.18°F
Temperature Reading: -55°C to +125°C (-67°F to +257°F) / SensorGateway operates up to 75°C
Temperature Accuracy: +/- 1°C (+/- 2°F) over 0°C to +75°C / 32°F to 167°F
Write Your Own Review
Introducing the ServersCheck Mobile SensorGateway, the wireless base unit
designed for monitoring remote infrastructure sites. Features: support for 2G/3G/4G*, built-in temperature sensor, web server (HTTP or HTTPS), alerting via email, SMS via SIM card, SNMP v1,v2 &v3 agent, XML output & more.The world's first LTE enabled infrastructure monitoring unit with triple network redundancy for secure remote connectivity.
- It's ultra connected: 2G, 3G and 4G!
when monitoring remote sites, it's all about connectivity. When you have a wired IP network, it will use the mobile network as a backup. No wired IP network? This device has got you covered with its mobile support.To keep your remote sites safe, it does not accept any incoming data connections over the mobile phone network.By supporting 2G, 3G and 4G, it has a triple fail-over built-in so that if one network fails, it automatically tries the other network.
- PINGs the network
using the new PING check type, the device will monitor the wired IP connectivity. If that fails, then it will generate an alert using the mobile phone network so that you know that the IP connectivity with your remote site is lost.With its output features, it doesn't stop at the alerting level. It can also trigger output controls such as a power cycle of a router. This allows you to have it automatically try to restore your IP link.
- Web server for easy administration
the unit has a built-in web server that you can access to configure, read sensor data, define alerts and more.
- Alerting via email, SMS or voice call
want to be alerted when thresholds are exceeded? the device can itself send out alerts via email, SMS or voice call alert.Emails can be configured to be sent through your mail server or public mail servers like Gmail. SMS & Voice call alerts are sent through our gateway. Credits are included in the Premium plans.
- SNMP ready with built-in SNMP agent
supports SNMP v2 & v3 with following SNMP commands:GET, GETNEXT, SET, WALK & TRAPSThis feature allowsyou to integrate the devices with any SNMP or DCIM software
- SaaS: cloud based monitoring
monitor, report & alert on your sensors from our cloud based Software-As-A-Service platform .
- Supports up to 2 external probes or up to 8 with optional sensor hub
- Compatible with many monitoring tools
using SNMP the sensorgateway can be integrated with many different tools such as Schneider, Emerson, IO, Nlyte, iTracs, HP OpenView, IBM Tivoli, CA, BMC, IO, Modius, MRTG, Cacti, Nagios, Zenoss, ManageEngine, Ipswitch WhatsUp, Paessler PRTG, Solarwinds & more.
- ServersCheck Monitoring software
the free ServersCheck Monitoring Software enables you to centrally monitor, report and alert on sensor values. it offers advanced monitoring capabilities based on heatmaps - those heatmaps will plot sensor readings on your data center or server room floor plan.
- GSM Mobile frequencies:
GSM | GPRS | EDGE : 850 , 900 , 1800 , 1900 MHz
UMTS|HSPA+ : 900, 1800, 2100 MHz
LTE : 800, 900, 1800, 2100, 2600 MHz
Mobile Certification: CE, GCF
Market: Europe, Middle-East, Africa, Asia, Pacific (for EU frequencies only)
CDMA is not supported.
Operating temperature range: 0°C to +75°C (+167°F)
Operating humidity range: < 90% rH (non-condensating)
Dimensions: 70 mm (2.7") x 88 mm (3.4") x 33 mm (1.4")
TCP/IP: IPv4 at 10/100 Mbps
Power Source: PoE: IEEE 802.3af
Power Usage: 1500mW (without sensors attached)
Built-in: web server, SNMP v1, v2 & v3 (MD5/AES)
Built-in alerting options: email SMS (over IP) & SNMP Traps
External sensors probes: 2 sensor probes through straight RJ45 cable with max distance of 10m or 30ft
Max distance to switch: depending on cable quality up to 100m / 300ft
- Built-in Temperature Sensor:
Temperature Resolution: 0.1°C / 0.18°F
Temperature Reading: -55°C to +125°C (-67°F to +257°F) / SensorGateway operates up to 75°C
Temperature Accuracy: +/- 1°C (+/- 2°F) over 0°C to +75°C / 32°F to 167°F
Write Your Own Review
Related Products By Brand
Our site uses cookies and other technologies in order to optimize the website and for continuous improvement.
You agree to the usage of cookies when you continue using this site. For more information visit our privacy policy.
