Raritan PX3TS-1875R PDU
- Home
- Power
- Power Distribution Units
- Switched PDU
- Raritan PX3TS-1875R PDU
Raritan's PX3TS Rack Transfer switch is an ultra high speed switch which provides power to devices from one or two sources ensuring that if there is failure to any one source, power is retained to the device. It has an inbuilt pdu that provides Unit level metering (A, V, kVA, kW, kWh) with support for plug-and-play environmental sensors and USB ports for wifi or webcams. PX3TS-1000 models do not support outlet metering or remote switching.
- Load transfer times 4–8ms
- Reliable transfer between sources regardless of phase.
- Over-sized relays (rated 48A) and SCRs (rated 70A)
- Eliminates electrical arcing that leads to transfer relay failure
- 3.3mm vs. typical 0.6mm contact air gap to prevent arcing due to surges.
- Inlet surge protection and field replaceable, fast-blow fuses for short circuit protection.
- Inlet or outlet-level metering and switching, with power quality monitoring.
- User configurable thresholds for power quality.
- Ethernet, Modbus, and SNMP networking.
- USB ports for Wi-Fi, camera, tablet, and cascading.
- Alarm and status updates via GSM text, email and syslog.
- Supports Raritan plug-and-play environment sensors.
- Runs in up to 60º C (UL), 50º C (CE) environment at 85% RH.
- Energy efficient and produces less heat.
- 20W power consumption.
- SecureLock™ ready to prevent accidental disconnects.
Phase | Single phase |
Maximum Input Current | 32A |
Nominal Input Voltage | 230V |
9 outlets | 8 x IEC C-13, 1 x IEC C-19 |
Input type | 2 x IEC C-20 |
Plug | IEC C-20 (PXI-TUV-C20C19-3M) |
Power Capacity | 3.3kVA |
Form Factors | One U |
Horizontal transfer switch, Ethernet, serial, 2x USB-A, USB-B and sensor connections.
Write Your Own Review
Raritan's PX3TS Rack Transfer switch is an ultra high speed switch which provides power to devices from one or two sources ensuring that if there is failure to any one source, power is retained to the device. It has an inbuilt pdu that provides Unit level metering (A, V, kVA, kW, kWh) with support for plug-and-play environmental sensors and USB ports for wifi or webcams. PX3TS-1000 models do not support outlet metering or remote switching.
- Load transfer times 4–8ms
- Reliable transfer between sources regardless of phase.
- Over-sized relays (rated 48A) and SCRs (rated 70A)
- Eliminates electrical arcing that leads to transfer relay failure
- 3.3mm vs. typical 0.6mm contact air gap to prevent arcing due to surges.
- Inlet surge protection and field replaceable, fast-blow fuses for short circuit protection.
- Inlet or outlet-level metering and switching, with power quality monitoring.
- User configurable thresholds for power quality.
- Ethernet, Modbus, and SNMP networking.
- USB ports for Wi-Fi, camera, tablet, and cascading.
- Alarm and status updates via GSM text, email and syslog.
- Supports Raritan plug-and-play environment sensors.
- Runs in up to 60º C (UL), 50º C (CE) environment at 85% RH.
- Energy efficient and produces less heat.
- 20W power consumption.
- SecureLock™ ready to prevent accidental disconnects.
Phase | Single phase |
Maximum Input Current | 32A |
Nominal Input Voltage | 230V |
9 outlets | 8 x IEC C-13, 1 x IEC C-19 |
Input type | 2 x IEC C-20 |
Plug | IEC C-20 (PXI-TUV-C20C19-3M) |
Power Capacity | 3.3kVA |
Form Factors | One U |
Horizontal transfer switch, Ethernet, serial, 2x USB-A, USB-B and sensor connections.
Write Your Own Review
Raritan's PX3TS Rack Transfer switch is an ultra high speed switch which provides power to devices from one or two sources ensuring that if there is failure to any one source, power is retained to the device. It has an inbuilt pdu that provides Unit level metering (A, V, kVA, kW, kWh) with support for plug-and-play environmental sensors and USB ports for wifi or webcams. PX3TS-1000 models do not support outlet metering or remote switching.
- Load transfer times 4–8ms
- Reliable transfer between sources regardless of phase.
- Over-sized relays (rated 48A) and SCRs (rated 70A)
- Eliminates electrical arcing that leads to transfer relay failure
- 3.3mm vs. typical 0.6mm contact air gap to prevent arcing due to surges.
- Inlet surge protection and field replaceable, fast-blow fuses for short circuit protection.
- Inlet or outlet-level metering and switching, with power quality monitoring.
- User configurable thresholds for power quality.
- Ethernet, Modbus, and SNMP networking.
- USB ports for Wi-Fi, camera, tablet, and cascading.
- Alarm and status updates via GSM text, email and syslog.
- Supports Raritan plug-and-play environment sensors.
- Runs in up to 60º C (UL), 50º C (CE) environment at 85% RH.
- Energy efficient and produces less heat.
- 20W power consumption.
- SecureLock™ ready to prevent accidental disconnects.
Phase | Single phase |
Maximum Input Current | 32A |
Nominal Input Voltage | 230V |
9 outlets | 8 x IEC C-13, 1 x IEC C-19 |
Input type | 2 x IEC C-20 |
Plug | IEC C-20 (PXI-TUV-C20C19-3M) |
Power Capacity | 3.3kVA |
Form Factors | One U |
Horizontal transfer switch, Ethernet, serial, 2x USB-A, USB-B and sensor connections.
Write Your Own Review
Related Products By Brand
Our site uses cookies and other technologies in order to optimize the website and for continuous improvement.
You agree to the usage of cookies when you continue using this site. For more information visit our privacy policy.
