+31 61 151 5873 
+353 61 574160 
+44 (0) 203 755 0970
Cyber Power PDU20MHVCEE10AT Metered
- Home
- Cyber Power PDU20MHVCEE10AT Metered
The Automatic Transfer Switch CyberPower provides power redundancy with complete computer hardware equipped with a single power supply. This system is capable of transferring power from a computer equipment to another source in order to maintain a perfect operation in the event of failure of the original source. This feature allows to raise the level of protection of equipment that is not fitted to the base of a redundant power supply.
The input and output levels of the ATS is configurable, enabling it to large scenarios. The ATS is equipped with a multifunction LCD display, allowing local management and real-time monitoring. So you can monitor and configure the load in order to avoid overloads and effectively balance the consumption levels.
Through the Web, using the SNMP / HTTP and Telnet, you can remotely control the output jacks so power cycle equipment. ** Optional on Series Measured
- Double entrance with automatic detection and switching
- Status Indicator LED
- Multifunction display
- Input voltage and configurable Load Rating
- Event logs **
- Automatic event notification **
- PowerPanel® Business Edition **
- Remote Management SNMP / HTTP **
- Optional on Series ** Measured
| Model | PDU20SWHVIEC8FNET |
| Category (Measured or Controlled) | Measured |
| Entrance | |
| Nominal input voltage | 200V / 240V |
| Frequency | 50Hz/60Hz |
| Maximum Input Current | 20A (Derated to 16A) |
| Plug Type | 2 x IEC 309 16A |
| Output | |
| Nominal Output Voltage | 200V - 240V |
| No. of output taken branches | 1 |
| No. shots Total | 10 |
| Outlet Type | IEC-320 C13 |
| Information on the LCD display | KW, Tension, Courant, Info Réseau, Version H/W & F/W |
| LED lights | Input , output load |
| Transfer Time | 8-12mS (typical) |
| Management & Communications | |
| SNMP / HTTP Remote Monitoring | TCP/IP, UDP, DHCP, SNMP, HTTP |
| Connectivity | RJ45, DB9/RS232 |
| Physical | |
| Dimensions (HxWxD) mm | 44 x 433 x 236 |
| Rack Size | 1U |
| Weight (kg) | 7.4 |
| Style | Rackmount, Vertical Rackmount, Under-Counter |
| Form Factors Supported | 1U rackmount, 0U vertical rackmount, undercounter installation supported |
| Cord Retention Tray/Cord Organizers | Yes |
| Adjustable Mounting Brackets | 2 set(L-short/L-long) |
| External Site Ground Pin | Yes |
| Environmental | |
| Operating Temperature | 0°C to 45°C |
| Operating Humidity | 0% - 95% non-condensing |
| Maximum Operating Elevation | 4,500 m |
| Certifications | |
| Certifications | UL60950_1 , CSA C22.2, FCC Class A, CE, C-tick |
| ROHS | ROHS Compliant |
Write Your Own Review
The Automatic Transfer Switch CyberPower provides power redundancy with complete computer hardware equipped with a single power supply. This system is capable of transferring power from a computer equipment to another source in order to maintain a perfect operation in the event of failure of the original source. This feature allows to raise the level of protection of equipment that is not fitted to the base of a redundant power supply.
The input and output levels of the ATS is configurable, enabling it to large scenarios. The ATS is equipped with a multifunction LCD display, allowing local management and real-time monitoring. So you can monitor and configure the load in order to avoid overloads and effectively balance the consumption levels.
Through the Web, using the SNMP / HTTP and Telnet, you can remotely control the output jacks so power cycle equipment. ** Optional on Series Measured
- Double entrance with automatic detection and switching
- Status Indicator LED
- Multifunction display
- Input voltage and configurable Load Rating
- Event logs **
- Automatic event notification **
- PowerPanel® Business Edition **
- Remote Management SNMP / HTTP **
- Optional on Series ** Measured
| Model | PDU20SWHVIEC8FNET |
| Category (Measured or Controlled) | Measured |
| Entrance | |
| Nominal input voltage | 200V / 240V |
| Frequency | 50Hz/60Hz |
| Maximum Input Current | 20A (Derated to 16A) |
| Plug Type | 2 x IEC 309 16A |
| Output | |
| Nominal Output Voltage | 200V - 240V |
| No. of output taken branches | 1 |
| No. shots Total | 10 |
| Outlet Type | IEC-320 C13 |
| Information on the LCD display | KW, Tension, Courant, Info Réseau, Version H/W & F/W |
| LED lights | Input , output load |
| Transfer Time | 8-12mS (typical) |
| Management & Communications | |
| SNMP / HTTP Remote Monitoring | TCP/IP, UDP, DHCP, SNMP, HTTP |
| Connectivity | RJ45, DB9/RS232 |
| Physical | |
| Dimensions (HxWxD) mm | 44 x 433 x 236 |
| Rack Size | 1U |
| Weight (kg) | 7.4 |
| Style | Rackmount, Vertical Rackmount, Under-Counter |
| Form Factors Supported | 1U rackmount, 0U vertical rackmount, undercounter installation supported |
| Cord Retention Tray/Cord Organizers | Yes |
| Adjustable Mounting Brackets | 2 set(L-short/L-long) |
| External Site Ground Pin | Yes |
| Environmental | |
| Operating Temperature | 0°C to 45°C |
| Operating Humidity | 0% - 95% non-condensing |
| Maximum Operating Elevation | 4,500 m |
| Certifications | |
| Certifications | UL60950_1 , CSA C22.2, FCC Class A, CE, C-tick |
| ROHS | ROHS Compliant |
Write Your Own Review
The Automatic Transfer Switch CyberPower provides power redundancy with complete computer hardware equipped with a single power supply. This system is capable of transferring power from a computer equipment to another source in order to maintain a perfect operation in the event of failure of the original source. This feature allows to raise the level of protection of equipment that is not fitted to the base of a redundant power supply.
The input and output levels of the ATS is configurable, enabling it to large scenarios. The ATS is equipped with a multifunction LCD display, allowing local management and real-time monitoring. So you can monitor and configure the load in order to avoid overloads and effectively balance the consumption levels.
Through the Web, using the SNMP / HTTP and Telnet, you can remotely control the output jacks so power cycle equipment. ** Optional on Series Measured
- Double entrance with automatic detection and switching
- Status Indicator LED
- Multifunction display
- Input voltage and configurable Load Rating
- Event logs **
- Automatic event notification **
- PowerPanel® Business Edition **
- Remote Management SNMP / HTTP **
- Optional on Series ** Measured
| Model | PDU20SWHVIEC8FNET |
| Category (Measured or Controlled) | Measured |
| Entrance | |
| Nominal input voltage | 200V / 240V |
| Frequency | 50Hz/60Hz |
| Maximum Input Current | 20A (Derated to 16A) |
| Plug Type | 2 x IEC 309 16A |
| Output | |
| Nominal Output Voltage | 200V - 240V |
| No. of output taken branches | 1 |
| No. shots Total | 10 |
| Outlet Type | IEC-320 C13 |
| Information on the LCD display | KW, Tension, Courant, Info Réseau, Version H/W & F/W |
| LED lights | Input , output load |
| Transfer Time | 8-12mS (typical) |
| Management & Communications | |
| SNMP / HTTP Remote Monitoring | TCP/IP, UDP, DHCP, SNMP, HTTP |
| Connectivity | RJ45, DB9/RS232 |
| Physical | |
| Dimensions (HxWxD) mm | 44 x 433 x 236 |
| Rack Size | 1U |
| Weight (kg) | 7.4 |
| Style | Rackmount, Vertical Rackmount, Under-Counter |
| Form Factors Supported | 1U rackmount, 0U vertical rackmount, undercounter installation supported |
| Cord Retention Tray/Cord Organizers | Yes |
| Adjustable Mounting Brackets | 2 set(L-short/L-long) |
| External Site Ground Pin | Yes |
| Environmental | |
| Operating Temperature | 0°C to 45°C |
| Operating Humidity | 0% - 95% non-condensing |
| Maximum Operating Elevation | 4,500 m |
| Certifications | |
| Certifications | UL60950_1 , CSA C22.2, FCC Class A, CE, C-tick |
| ROHS | ROHS Compliant |
Write Your Own Review
Related Products By Brand
Our site uses cookies and other technologies in order to optimize the website and for continuous improvement.
You agree to the usage of cookies when you continue using this site. For more information visit our privacy policy.
