Black Box LPH2008A-4GSFP Industrial Managed Gigabit Ethernet PoE+ Switch
- Home
- Connectivity
- Black Box LPH2008A-4GSFP Industrial Managed Gigabit Ethernet PoE+ Switch
- Operates in extreme temperatures.
- Supports B-ring, STP, and link aggregation for redundancy and resiliency.
- Meets numerous harsh/industrial standards, including NEMA TS1/2 for traffic control, EN6100-6-2 and -6-4 for industrial environments, including railway applications.
- Features bandwidth rate control, traffic prioritization, and quality of service.
- Manage through a Web interface, SNMP, or command-line interface (CLI).
- Supports IEEE 802.1x security.
- Features IP Multicast Filtering through IGMP Snooping V1, V2, and V3. Supports port-based VLAN and IEEE 802.1Q VLAN Tagging and GVRP.
- Offers QoS with four priority queues.
- Features per-port programmable MAC address locking and up to 24 static secure MAC addresses per port.
- Supports DIN-rail, panel, and rackmount installation.
- Has eight PoE+ (802.3at) ports and four Gigabit SFP ports.
- Use to connect and power security cameras and access points.
- Offers less than a 30-msec recovery time, link failover, and redundant power inputs.
Technology | |
Address Table Size | 8K |
Distance | Copper Ethernet ports: 328 ft. (100m); SFP: Depends on SFP |
Forwarding and Filtering Rate | 14,880 pps for 10 Mbps, 148,810 pps for 100 Mbps, 1,488,810 pps for 1000 Mbps |
Packet Buffer Memory | 2 Mbits |
Priority Queues | 4 |
Processing Type | Store-and-Forward; Half-duplex back-pressure; IEEE 802.3x full-duplex flow control |
Management | RS-232 console (RJ-45), Telnet, SNMP v1, v2, and v3, RMON, Web browser, TFTP management |
Security | Port-based network access control (802.1x); VLAN (802.1Q) to segregate and secure network traffic; Radius centralized password management; SNMPv3 encrypted authentication and access security; Device binding; https/ssh enhances network security |
Switch Properties | |
Switching Latency | 7 µs |
Switching Bandwidth | 24 Gbps |
VLANs | 256 maximum available |
IGMP Multicast Groups | 128 per VLAN |
Port Rate Limiting | User-defined |
Interface | |
Connectors | (8) RJ-45 10/100/1000, auto MDI/MDI-X, PSE ports, (4) Gigabit SFP ports |
Console Port | (1) RJ-45 RS-232 |
Physical | |
Alarm Contact | (1) Relay output with current 1A @ 24 VDC |
Enclosure | IP-30 aluminum |
Dimensions | 6.06"H x 3.8"W x 4.27"D (15.4 x 9.64 x 10.85 cm) |
Weight | 2.7 lb. (1.23 kg) |
Indicators | (3) Power LEDs: Power Status, Power 1, Power 2, (1) Ring Master LED, (1) Ring Enabled LED, (1) Fault LED, (4) PoE LEDs for RJ-45 LAN ports, (4) SFP Link/Act LEDs for fiber uplink ports, (4) RJ-45 Link/Act LEDs, (4) RJ-45 Full-duplex LEDs |
Power | Input: (2) power inputs on 6-pin terminal blocks: 48 to 57 VDC; Consumption: 13.2 watts (unit only, not counting PoE) |
Environmental | |
Operating Temperature | -40° to +158° F (-40° to +70° C) |
Storage Temperature | -40° to +185° F (-40° to +85° C) |
Write Your Own Review
- Operates in extreme temperatures.
- Supports B-ring, STP, and link aggregation for redundancy and resiliency.
- Meets numerous harsh/industrial standards, including NEMA TS1/2 for traffic control, EN6100-6-2 and -6-4 for industrial environments, including railway applications.
- Features bandwidth rate control, traffic prioritization, and quality of service.
- Manage through a Web interface, SNMP, or command-line interface (CLI).
- Supports IEEE 802.1x security.
- Features IP Multicast Filtering through IGMP Snooping V1, V2, and V3. Supports port-based VLAN and IEEE 802.1Q VLAN Tagging and GVRP.
- Offers QoS with four priority queues.
- Features per-port programmable MAC address locking and up to 24 static secure MAC addresses per port.
- Supports DIN-rail, panel, and rackmount installation.
- Has eight PoE+ (802.3at) ports and four Gigabit SFP ports.
- Use to connect and power security cameras and access points.
- Offers less than a 30-msec recovery time, link failover, and redundant power inputs.
Technology | |
Address Table Size | 8K |
Distance | Copper Ethernet ports: 328 ft. (100m); SFP: Depends on SFP |
Forwarding and Filtering Rate | 14,880 pps for 10 Mbps, 148,810 pps for 100 Mbps, 1,488,810 pps for 1000 Mbps |
Packet Buffer Memory | 2 Mbits |
Priority Queues | 4 |
Processing Type | Store-and-Forward; Half-duplex back-pressure; IEEE 802.3x full-duplex flow control |
Management | RS-232 console (RJ-45), Telnet, SNMP v1, v2, and v3, RMON, Web browser, TFTP management |
Security | Port-based network access control (802.1x); VLAN (802.1Q) to segregate and secure network traffic; Radius centralized password management; SNMPv3 encrypted authentication and access security; Device binding; https/ssh enhances network security |
Switch Properties | |
Switching Latency | 7 µs |
Switching Bandwidth | 24 Gbps |
VLANs | 256 maximum available |
IGMP Multicast Groups | 128 per VLAN |
Port Rate Limiting | User-defined |
Interface | |
Connectors | (8) RJ-45 10/100/1000, auto MDI/MDI-X, PSE ports, (4) Gigabit SFP ports |
Console Port | (1) RJ-45 RS-232 |
Physical | |
Alarm Contact | (1) Relay output with current 1A @ 24 VDC |
Enclosure | IP-30 aluminum |
Dimensions | 6.06"H x 3.8"W x 4.27"D (15.4 x 9.64 x 10.85 cm) |
Weight | 2.7 lb. (1.23 kg) |
Indicators | (3) Power LEDs: Power Status, Power 1, Power 2, (1) Ring Master LED, (1) Ring Enabled LED, (1) Fault LED, (4) PoE LEDs for RJ-45 LAN ports, (4) SFP Link/Act LEDs for fiber uplink ports, (4) RJ-45 Link/Act LEDs, (4) RJ-45 Full-duplex LEDs |
Power | Input: (2) power inputs on 6-pin terminal blocks: 48 to 57 VDC; Consumption: 13.2 watts (unit only, not counting PoE) |
Environmental | |
Operating Temperature | -40° to +158° F (-40° to +70° C) |
Storage Temperature | -40° to +185° F (-40° to +85° C) |
Write Your Own Review
- Operates in extreme temperatures.
- Supports B-ring, STP, and link aggregation for redundancy and resiliency.
- Meets numerous harsh/industrial standards, including NEMA TS1/2 for traffic control, EN6100-6-2 and -6-4 for industrial environments, including railway applications.
- Features bandwidth rate control, traffic prioritization, and quality of service.
- Manage through a Web interface, SNMP, or command-line interface (CLI).
- Supports IEEE 802.1x security.
- Features IP Multicast Filtering through IGMP Snooping V1, V2, and V3. Supports port-based VLAN and IEEE 802.1Q VLAN Tagging and GVRP.
- Offers QoS with four priority queues.
- Features per-port programmable MAC address locking and up to 24 static secure MAC addresses per port.
- Supports DIN-rail, panel, and rackmount installation.
- Has eight PoE+ (802.3at) ports and four Gigabit SFP ports.
- Use to connect and power security cameras and access points.
- Offers less than a 30-msec recovery time, link failover, and redundant power inputs.
Technology | |
Address Table Size | 8K |
Distance | Copper Ethernet ports: 328 ft. (100m); SFP: Depends on SFP |
Forwarding and Filtering Rate | 14,880 pps for 10 Mbps, 148,810 pps for 100 Mbps, 1,488,810 pps for 1000 Mbps |
Packet Buffer Memory | 2 Mbits |
Priority Queues | 4 |
Processing Type | Store-and-Forward; Half-duplex back-pressure; IEEE 802.3x full-duplex flow control |
Management | RS-232 console (RJ-45), Telnet, SNMP v1, v2, and v3, RMON, Web browser, TFTP management |
Security | Port-based network access control (802.1x); VLAN (802.1Q) to segregate and secure network traffic; Radius centralized password management; SNMPv3 encrypted authentication and access security; Device binding; https/ssh enhances network security |
Switch Properties | |
Switching Latency | 7 µs |
Switching Bandwidth | 24 Gbps |
VLANs | 256 maximum available |
IGMP Multicast Groups | 128 per VLAN |
Port Rate Limiting | User-defined |
Interface | |
Connectors | (8) RJ-45 10/100/1000, auto MDI/MDI-X, PSE ports, (4) Gigabit SFP ports |
Console Port | (1) RJ-45 RS-232 |
Physical | |
Alarm Contact | (1) Relay output with current 1A @ 24 VDC |
Enclosure | IP-30 aluminum |
Dimensions | 6.06"H x 3.8"W x 4.27"D (15.4 x 9.64 x 10.85 cm) |
Weight | 2.7 lb. (1.23 kg) |
Indicators | (3) Power LEDs: Power Status, Power 1, Power 2, (1) Ring Master LED, (1) Ring Enabled LED, (1) Fault LED, (4) PoE LEDs for RJ-45 LAN ports, (4) SFP Link/Act LEDs for fiber uplink ports, (4) RJ-45 Link/Act LEDs, (4) RJ-45 Full-duplex LEDs |
Power | Input: (2) power inputs on 6-pin terminal blocks: 48 to 57 VDC; Consumption: 13.2 watts (unit only, not counting PoE) |
Environmental | |
Operating Temperature | -40° to +158° F (-40° to +70° C) |
Storage Temperature | -40° to +185° F (-40° to +85° C) |
Write Your Own Review
Related Products By Brand
Our site uses cookies and other technologies in order to optimize the website and for continuous improvement.
You agree to the usage of cookies when you continue using this site. For more information visit our privacy policy.
