+31 61 151 5873 
+353 61 574160 
+44 (0) 203 755 0970 
+49 6966554240
Black Box LEH813-1MMST Hardened Managed Ethernet Switch
- Home
- Connectivity
- Black Box LEH813-1MMST Hardened Managed Ethernet Switch
- IP multicast filtering through IGMP snooping V1, V2, and V3.
- Supports port-based VLAN and IEEE 802.1Q VLAN tagging.
- IEEE 802.1p Quality of Service (QoS) with four priority queues.
- MAC-based trunking with automatic link failover.
- Manage through an RS-232 console; Telnet; SNMP V1, V2c, or V3; RMON; Web browser; or TFTP.
- Supports command line interface on an RS-232 console.
- Supports IEEE 802.1x security.
- Complies with the IEC 61000-6-2 EMC generic standard immunity for industrial environments.
- Bandwidth rate control.
- Per-port programmable MAC address locking.
- Up to 24 static secure MAC addresses per port.
- Port mirroring.
- 8K MAC addresses.
- 2 Mb buffer memory.
- Operates 10-/100-Mbps full-/half-duplex.
- Autonegotiation, auto-MDI/MDIX.
- Full wire-speed forwarding rate.
- Redundant power inputs include a terminal block and DC jack.
- Supports DIN-rail, panel, and rackmount installation.
- Complies with NEMA TS1 and TS2 environmental requirements for traffic control equipment.
- Supports Network Time Protocol (NTP).
- IEEE 802.1w, IEEE 802.1S, and IEEE 802.1D spanning tree.
Designed for rugged environments, this Hardened Managed Ethernet Switch comes with (13) 10-/100-Mbps RJ-45 ports and (1) 100BASE-FX ST® multimode port in an enclosure that offers several mounting options. Fully manageable via SNMP, a Web browser, Telnet, or a console port, the LEH813-1MMST is designed to integrate 10-/100-Mbps networks into 100BASE-FX backbones.
- Operates in very hot and very cold conditions—even outdoors in sheltered locations.
- Great for traffic signal applications.
- Support for network redundancy; offers a recovery time of <15 ms.
| Forward and Filtering Rate | 14,880 pps for 10 Mbps; 148,810 pps for 100 Mbps |
| MAC Addresses | 8K |
| Operating Temperature | -40° to +167° F (-40° to +75° C) |
| Packet Buffer Memory | 2 Mb |
| Processing Type | Store-and-forward, half-duplex back-pressure and IEEE 802.3x full-duplex flow control |
| Standards | IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX/100BASE-FX, IEEE 802.3x, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1w, IEEE 802.1x |
| CE Approval | Yes |
| Connectors | 10/100BASE-TX: (13) RJ-45; 100BASE-FX: (1) ST (multimode); Console: (1) DB9 F (RJ-232) |
| Indicators | Power status: Power 1, Power 2, Power 3; Per port: Link/Activity, Speed |
| Power | Input voltage: 12-32 VDC (terminal block); 12 VDC (DC jack); Consumption: 15 W (max.); 1.25 A at 12 VDC, 0.625 A at 24 VDC |
| Size | 2"H x 9.25"W x 5"D (5.1 x 23.5 x 12.7 cm) |
| Weight | 3.3 lb. (1.5 kg) |
Write Your Own Review
- IP multicast filtering through IGMP snooping V1, V2, and V3.
- Supports port-based VLAN and IEEE 802.1Q VLAN tagging.
- IEEE 802.1p Quality of Service (QoS) with four priority queues.
- MAC-based trunking with automatic link failover.
- Manage through an RS-232 console; Telnet; SNMP V1, V2c, or V3; RMON; Web browser; or TFTP.
- Supports command line interface on an RS-232 console.
- Supports IEEE 802.1x security.
- Complies with the IEC 61000-6-2 EMC generic standard immunity for industrial environments.
- Bandwidth rate control.
- Per-port programmable MAC address locking.
- Up to 24 static secure MAC addresses per port.
- Port mirroring.
- 8K MAC addresses.
- 2 Mb buffer memory.
- Operates 10-/100-Mbps full-/half-duplex.
- Autonegotiation, auto-MDI/MDIX.
- Full wire-speed forwarding rate.
- Redundant power inputs include a terminal block and DC jack.
- Supports DIN-rail, panel, and rackmount installation.
- Complies with NEMA TS1 and TS2 environmental requirements for traffic control equipment.
- Supports Network Time Protocol (NTP).
- IEEE 802.1w, IEEE 802.1S, and IEEE 802.1D spanning tree.
Designed for rugged environments, this Hardened Managed Ethernet Switch comes with (13) 10-/100-Mbps RJ-45 ports and (1) 100BASE-FX ST® multimode port in an enclosure that offers several mounting options. Fully manageable via SNMP, a Web browser, Telnet, or a console port, the LEH813-1MMST is designed to integrate 10-/100-Mbps networks into 100BASE-FX backbones.
- Operates in very hot and very cold conditions—even outdoors in sheltered locations.
- Great for traffic signal applications.
- Support for network redundancy; offers a recovery time of <15 ms.
| Forward and Filtering Rate | 14,880 pps for 10 Mbps; 148,810 pps for 100 Mbps |
| MAC Addresses | 8K |
| Operating Temperature | -40° to +167° F (-40° to +75° C) |
| Packet Buffer Memory | 2 Mb |
| Processing Type | Store-and-forward, half-duplex back-pressure and IEEE 802.3x full-duplex flow control |
| Standards | IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX/100BASE-FX, IEEE 802.3x, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1w, IEEE 802.1x |
| CE Approval | Yes |
| Connectors | 10/100BASE-TX: (13) RJ-45; 100BASE-FX: (1) ST (multimode); Console: (1) DB9 F (RJ-232) |
| Indicators | Power status: Power 1, Power 2, Power 3; Per port: Link/Activity, Speed |
| Power | Input voltage: 12-32 VDC (terminal block); 12 VDC (DC jack); Consumption: 15 W (max.); 1.25 A at 12 VDC, 0.625 A at 24 VDC |
| Size | 2"H x 9.25"W x 5"D (5.1 x 23.5 x 12.7 cm) |
| Weight | 3.3 lb. (1.5 kg) |
Write Your Own Review
- IP multicast filtering through IGMP snooping V1, V2, and V3.
- Supports port-based VLAN and IEEE 802.1Q VLAN tagging.
- IEEE 802.1p Quality of Service (QoS) with four priority queues.
- MAC-based trunking with automatic link failover.
- Manage through an RS-232 console; Telnet; SNMP V1, V2c, or V3; RMON; Web browser; or TFTP.
- Supports command line interface on an RS-232 console.
- Supports IEEE 802.1x security.
- Complies with the IEC 61000-6-2 EMC generic standard immunity for industrial environments.
- Bandwidth rate control.
- Per-port programmable MAC address locking.
- Up to 24 static secure MAC addresses per port.
- Port mirroring.
- 8K MAC addresses.
- 2 Mb buffer memory.
- Operates 10-/100-Mbps full-/half-duplex.
- Autonegotiation, auto-MDI/MDIX.
- Full wire-speed forwarding rate.
- Redundant power inputs include a terminal block and DC jack.
- Supports DIN-rail, panel, and rackmount installation.
- Complies with NEMA TS1 and TS2 environmental requirements for traffic control equipment.
- Supports Network Time Protocol (NTP).
- IEEE 802.1w, IEEE 802.1S, and IEEE 802.1D spanning tree.
Designed for rugged environments, this Hardened Managed Ethernet Switch comes with (13) 10-/100-Mbps RJ-45 ports and (1) 100BASE-FX ST® multimode port in an enclosure that offers several mounting options. Fully manageable via SNMP, a Web browser, Telnet, or a console port, the LEH813-1MMST is designed to integrate 10-/100-Mbps networks into 100BASE-FX backbones.
- Operates in very hot and very cold conditions—even outdoors in sheltered locations.
- Great for traffic signal applications.
- Support for network redundancy; offers a recovery time of <15 ms.
| Forward and Filtering Rate | 14,880 pps for 10 Mbps; 148,810 pps for 100 Mbps |
| MAC Addresses | 8K |
| Operating Temperature | -40° to +167° F (-40° to +75° C) |
| Packet Buffer Memory | 2 Mb |
| Processing Type | Store-and-forward, half-duplex back-pressure and IEEE 802.3x full-duplex flow control |
| Standards | IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX/100BASE-FX, IEEE 802.3x, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1w, IEEE 802.1x |
| CE Approval | Yes |
| Connectors | 10/100BASE-TX: (13) RJ-45; 100BASE-FX: (1) ST (multimode); Console: (1) DB9 F (RJ-232) |
| Indicators | Power status: Power 1, Power 2, Power 3; Per port: Link/Activity, Speed |
| Power | Input voltage: 12-32 VDC (terminal block); 12 VDC (DC jack); Consumption: 15 W (max.); 1.25 A at 12 VDC, 0.625 A at 24 VDC |
| Size | 2"H x 9.25"W x 5"D (5.1 x 23.5 x 12.7 cm) |
| Weight | 3.3 lb. (1.5 kg) |
Write Your Own Review
Related Products By Brand
Our site uses cookies and other technologies in order to optimize the website and for continuous improvement.
You agree to the usage of cookies when you continue using this site. For more information visit our privacy policy.
