Black Box LEH2004A-4GSFP Industrial Managed Gigabit Ethernet Switch
- Home
- Connectivity
- Black Box LEH2004A-4GSFP Industrial Managed Gigabit Ethernet Switch
- Meets numerous harsh/industrial standards, including NEMA TS1/2 for traffic control, EN6100-6-2 and -6-4 for industrial environments, including railway applications.
- Features bandwidth rate control, traffic prioritization, and quality of service.
- Manage through a Web interface, SNMP, or command-line interface (CLI).
- Supports IEEE 802.1x security.
- Features IP Multicast Filtering through IGMP Snooping V1, V2, and V3. Supports port-based VLAN and IEEE 802.1Q VLAN Tagging and GVRP.
- Offers QoS with four priority queues.
- Features per-port programmable MAC address locking and up to 24 static secure MAC addresses per port.
- Supports DIN-rail, panel, and rackmount installation.
- Works with four different power supplies.
Designed for rugged environments, this Industrial Managed Ethernet Switch gives you the high reliability you need. Use this managed switch to configure, control, and monitor remote equipment in the worst environments.
- Operates in extreme temperatures.
- Supports B-ring, STP, and link aggregation for redundancy and resiliency.
- Offers less than a 30-msec recovery time, link failover, and redundant power inputs.
Technology | |
Address Table Size | 8K |
Distance | Copper Ethernet ports: 328 ft. (100m); SFP: Depends on SFP |
Forwarding and Filtering Rate | 14,880 pps for 10 Mbps, 148,810 pps for 100 Mbps, 1,488,810 pps for 1000 Mbps |
Packet Buffer Memory | 2 Mbits |
Priority Queues | 4 |
Processing Type | Store-and-Forward; Half-duplex back-pressure; IEEE 802.3x full-duplex flow control |
Management | RS-232 console (RJ-45) Telnet SNMP v1, v2, and v3 RMON Web browser TFTP management |
Security | Port-based network access control (802.1x); VLAN (802.1Q) to segregate and secure network traffic; Radius centralized password management; SNMPv3 encrypted authentication and access security |
Switch Properties | |
Switching Latency | 7 µs |
Switching Bandwidth | 16 Gbps |
VLANs | 4094 maximum available |
IGMP Multicast Groups | 1024 |
Port Rate Limiting | User-defined |
Interface | |
Connectors | (4) RJ-45 10/100/1000, auto MDI/MDI-X ports, (4) 100/100BASE-X RJ-45 with SFP combo ports |
Console Port | (1) RJ-45 RS-232 |
Physical | |
Alarm Contact | (1) Relay output with current 1A @ 24 VDC |
Enclosure | IP-30 aluminum |
Dimensions | 6.05"H x 2.93"W x 4.3"D (15.36 x 7.43 x 10.92 cm) |
Weight | 2.36 lb. (1.08 kg) |
Indicators | (3) Power LEDs: Power Status, Power 1, Power 2 (1) Ring Master LED (1) Ring Enabled LED (1) Fault LED (4) SFP Link/Act LEDs for fiber uplink ports (4) RJ-45 Link/Act LEDs ? (4) Speed LEDs for LAN ports |
Power | (2) power inputs on 6-pin terminal blocks: 12 to 48 VDC; Consumption: 20 watts |
Environmental | |
Operating Temperature | -40° to +158° F (-40° to +70° C) |
Storage Temperature | -40° to +185° F (-40° to +85° C) |
Write Your Own Review
- Meets numerous harsh/industrial standards, including NEMA TS1/2 for traffic control, EN6100-6-2 and -6-4 for industrial environments, including railway applications.
- Features bandwidth rate control, traffic prioritization, and quality of service.
- Manage through a Web interface, SNMP, or command-line interface (CLI).
- Supports IEEE 802.1x security.
- Features IP Multicast Filtering through IGMP Snooping V1, V2, and V3. Supports port-based VLAN and IEEE 802.1Q VLAN Tagging and GVRP.
- Offers QoS with four priority queues.
- Features per-port programmable MAC address locking and up to 24 static secure MAC addresses per port.
- Supports DIN-rail, panel, and rackmount installation.
- Works with four different power supplies.
Designed for rugged environments, this Industrial Managed Ethernet Switch gives you the high reliability you need. Use this managed switch to configure, control, and monitor remote equipment in the worst environments.
- Operates in extreme temperatures.
- Supports B-ring, STP, and link aggregation for redundancy and resiliency.
- Offers less than a 30-msec recovery time, link failover, and redundant power inputs.
Technology | |
Address Table Size | 8K |
Distance | Copper Ethernet ports: 328 ft. (100m); SFP: Depends on SFP |
Forwarding and Filtering Rate | 14,880 pps for 10 Mbps, 148,810 pps for 100 Mbps, 1,488,810 pps for 1000 Mbps |
Packet Buffer Memory | 2 Mbits |
Priority Queues | 4 |
Processing Type | Store-and-Forward; Half-duplex back-pressure; IEEE 802.3x full-duplex flow control |
Management | RS-232 console (RJ-45) Telnet SNMP v1, v2, and v3 RMON Web browser TFTP management |
Security | Port-based network access control (802.1x); VLAN (802.1Q) to segregate and secure network traffic; Radius centralized password management; SNMPv3 encrypted authentication and access security |
Switch Properties | |
Switching Latency | 7 µs |
Switching Bandwidth | 16 Gbps |
VLANs | 4094 maximum available |
IGMP Multicast Groups | 1024 |
Port Rate Limiting | User-defined |
Interface | |
Connectors | (4) RJ-45 10/100/1000, auto MDI/MDI-X ports, (4) 100/100BASE-X RJ-45 with SFP combo ports |
Console Port | (1) RJ-45 RS-232 |
Physical | |
Alarm Contact | (1) Relay output with current 1A @ 24 VDC |
Enclosure | IP-30 aluminum |
Dimensions | 6.05"H x 2.93"W x 4.3"D (15.36 x 7.43 x 10.92 cm) |
Weight | 2.36 lb. (1.08 kg) |
Indicators | (3) Power LEDs: Power Status, Power 1, Power 2 (1) Ring Master LED (1) Ring Enabled LED (1) Fault LED (4) SFP Link/Act LEDs for fiber uplink ports (4) RJ-45 Link/Act LEDs ? (4) Speed LEDs for LAN ports |
Power | (2) power inputs on 6-pin terminal blocks: 12 to 48 VDC; Consumption: 20 watts |
Environmental | |
Operating Temperature | -40° to +158° F (-40° to +70° C) |
Storage Temperature | -40° to +185° F (-40° to +85° C) |
Write Your Own Review
- Meets numerous harsh/industrial standards, including NEMA TS1/2 for traffic control, EN6100-6-2 and -6-4 for industrial environments, including railway applications.
- Features bandwidth rate control, traffic prioritization, and quality of service.
- Manage through a Web interface, SNMP, or command-line interface (CLI).
- Supports IEEE 802.1x security.
- Features IP Multicast Filtering through IGMP Snooping V1, V2, and V3. Supports port-based VLAN and IEEE 802.1Q VLAN Tagging and GVRP.
- Offers QoS with four priority queues.
- Features per-port programmable MAC address locking and up to 24 static secure MAC addresses per port.
- Supports DIN-rail, panel, and rackmount installation.
- Works with four different power supplies.
Designed for rugged environments, this Industrial Managed Ethernet Switch gives you the high reliability you need. Use this managed switch to configure, control, and monitor remote equipment in the worst environments.
- Operates in extreme temperatures.
- Supports B-ring, STP, and link aggregation for redundancy and resiliency.
- Offers less than a 30-msec recovery time, link failover, and redundant power inputs.
Technology | |
Address Table Size | 8K |
Distance | Copper Ethernet ports: 328 ft. (100m); SFP: Depends on SFP |
Forwarding and Filtering Rate | 14,880 pps for 10 Mbps, 148,810 pps for 100 Mbps, 1,488,810 pps for 1000 Mbps |
Packet Buffer Memory | 2 Mbits |
Priority Queues | 4 |
Processing Type | Store-and-Forward; Half-duplex back-pressure; IEEE 802.3x full-duplex flow control |
Management | RS-232 console (RJ-45) Telnet SNMP v1, v2, and v3 RMON Web browser TFTP management |
Security | Port-based network access control (802.1x); VLAN (802.1Q) to segregate and secure network traffic; Radius centralized password management; SNMPv3 encrypted authentication and access security |
Switch Properties | |
Switching Latency | 7 µs |
Switching Bandwidth | 16 Gbps |
VLANs | 4094 maximum available |
IGMP Multicast Groups | 1024 |
Port Rate Limiting | User-defined |
Interface | |
Connectors | (4) RJ-45 10/100/1000, auto MDI/MDI-X ports, (4) 100/100BASE-X RJ-45 with SFP combo ports |
Console Port | (1) RJ-45 RS-232 |
Physical | |
Alarm Contact | (1) Relay output with current 1A @ 24 VDC |
Enclosure | IP-30 aluminum |
Dimensions | 6.05"H x 2.93"W x 4.3"D (15.36 x 7.43 x 10.92 cm) |
Weight | 2.36 lb. (1.08 kg) |
Indicators | (3) Power LEDs: Power Status, Power 1, Power 2 (1) Ring Master LED (1) Ring Enabled LED (1) Fault LED (4) SFP Link/Act LEDs for fiber uplink ports (4) RJ-45 Link/Act LEDs ? (4) Speed LEDs for LAN ports |
Power | (2) power inputs on 6-pin terminal blocks: 12 to 48 VDC; Consumption: 20 watts |
Environmental | |
Operating Temperature | -40° to +158° F (-40° to +70° C) |
Storage Temperature | -40° to +185° F (-40° to +85° C) |
Write Your Own Review
Related Products By Brand
Our site uses cookies and other technologies in order to optimize the website and for continuous improvement.
You agree to the usage of cookies when you continue using this site. For more information visit our privacy policy.
