+31 61 151 5873 
+353 61 574160 
+44 (0) 203 755 0970 
+49 8928944326
Black Box LB522A-KIT DeeSL.2 Ethernet Extender Kit
- Home
- Connectivity
- Black Box LB522A-KIT DeeSL.2 Ethernet Extender Kit
- An advanced auto-rate algorithm automatically determines the best possible baud rate for each connection and sets up the extender without the need for user interface.
- The unit has a built-in MDI-X switch, so it'll work with either a straight-through cable or a crossover cable
- Plug-and-play! Just plug it in, power it on, and it's up and running.
- This kit includes a pair of auto-rate Ethernet extenders, using a standard 2-wire connection, which simplifies your life and provides cost-effective network extension by enabling you to make the most of your pre-existing twisted-pair infrastructure.
- You'll be able to connect remote LANs across distances and at speeds previously unheard of. An auto-rate feature ensures that you achieve the highest possible speed on each connection.
- Extend your Ethernet connections, and get the best combination of speed and distance available. Four Ethernet ports enable you to make up to four 10-/100-Mbps connections easily.
- Support QoS, CoS, and VLAN: Ensure mission-critical network connections are of top quality with advanced traffic management features.
- A built-in console port makes setup a snap. And you can also use the embedded HTTP/SNMP agent to remotely manage the unit from anywhere in the world.
| Approvals | CE, RoHS |
| Compliance | FCC Part 15A; EMC Directive 89/336/EEC; Low-Voltage Directive 73/23/EEC |
| Data Rate | 11.4 Mbps at 0.8 mi. (1.4 km), full-duplex maximum |
| Distance | 5.2 mi. (8.4 km) maximum |
| LAN Protocols | 802.1d transparent bridging; 2K MAC address learning bridge |
| Management Interface | Web-based GUI; CLI for local and console access; password protected; SNMPv1/v2 (RFC 1157/1901/1905) agent and MIB (RFC 1213/1493; software upgradable via Web browser / TFTP |
| Modulation | TC-PAM 32; 16 |
| MTU Support | 1792 bytes |
| Operation | Ethernet: Full- or half-duplex |
| QoS Support | Rate limiting, rule-based/port-based; traffic classification based on port/802.1p/DSCP; WRR (weighted round robin)/SPQ (strict priority queueing) scheduling algorithm |
| VLAN Support | IEEE 802.1q VLAN Tagging; Port-based VLAN, up to 4000 VLANs. VLAN Stacking (Q-in-Q) |
| Interface | Ethernet: 10BASE-T/100BASE-TX |
| Connectors | (4) 8-position shielded RJ-45 Ethernet; Local/remote interconnect link: (1) shielded RJ-45; Management: Web: (1) shielded RJ-45; console: (1) shielded RJ-45; Power: (1) Universal Input (UI); Link: (1) 10BASE-T/100BASE-TX, autosensing, with half- or full-duplex operation |
| Indicators | Power, Alarm, Diagnostic, (4) WAN link, (4) Ethernet Link; (4) Ethernet 100M |
| Environmental | Operating temperature: +32 to +122° F (0 to 50° C); Storage temperature: -40 to +185° F (-40 to +85° C); |
| Power | 90-240 VAC, 50-60 Hz, universal |
| Dimensions | 1.9"H x 7.7"W x 6.6"D (4.8 x 19.5 x 16.8 cm) |
| Weight | 2.9 lb. (1.3 kg) not including the power supply |
Write Your Own Review
- An advanced auto-rate algorithm automatically determines the best possible baud rate for each connection and sets up the extender without the need for user interface.
- The unit has a built-in MDI-X switch, so it'll work with either a straight-through cable or a crossover cable
- Plug-and-play! Just plug it in, power it on, and it's up and running.
- This kit includes a pair of auto-rate Ethernet extenders, using a standard 2-wire connection, which simplifies your life and provides cost-effective network extension by enabling you to make the most of your pre-existing twisted-pair infrastructure.
- You'll be able to connect remote LANs across distances and at speeds previously unheard of. An auto-rate feature ensures that you achieve the highest possible speed on each connection.
- Extend your Ethernet connections, and get the best combination of speed and distance available. Four Ethernet ports enable you to make up to four 10-/100-Mbps connections easily.
- Support QoS, CoS, and VLAN: Ensure mission-critical network connections are of top quality with advanced traffic management features.
- A built-in console port makes setup a snap. And you can also use the embedded HTTP/SNMP agent to remotely manage the unit from anywhere in the world.
| Approvals | CE, RoHS |
| Compliance | FCC Part 15A; EMC Directive 89/336/EEC; Low-Voltage Directive 73/23/EEC |
| Data Rate | 11.4 Mbps at 0.8 mi. (1.4 km), full-duplex maximum |
| Distance | 5.2 mi. (8.4 km) maximum |
| LAN Protocols | 802.1d transparent bridging; 2K MAC address learning bridge |
| Management Interface | Web-based GUI; CLI for local and console access; password protected; SNMPv1/v2 (RFC 1157/1901/1905) agent and MIB (RFC 1213/1493; software upgradable via Web browser / TFTP |
| Modulation | TC-PAM 32; 16 |
| MTU Support | 1792 bytes |
| Operation | Ethernet: Full- or half-duplex |
| QoS Support | Rate limiting, rule-based/port-based; traffic classification based on port/802.1p/DSCP; WRR (weighted round robin)/SPQ (strict priority queueing) scheduling algorithm |
| VLAN Support | IEEE 802.1q VLAN Tagging; Port-based VLAN, up to 4000 VLANs. VLAN Stacking (Q-in-Q) |
| Interface | Ethernet: 10BASE-T/100BASE-TX |
| Connectors | (4) 8-position shielded RJ-45 Ethernet; Local/remote interconnect link: (1) shielded RJ-45; Management: Web: (1) shielded RJ-45; console: (1) shielded RJ-45; Power: (1) Universal Input (UI); Link: (1) 10BASE-T/100BASE-TX, autosensing, with half- or full-duplex operation |
| Indicators | Power, Alarm, Diagnostic, (4) WAN link, (4) Ethernet Link; (4) Ethernet 100M |
| Environmental | Operating temperature: +32 to +122° F (0 to 50° C); Storage temperature: -40 to +185° F (-40 to +85° C); |
| Power | 90-240 VAC, 50-60 Hz, universal |
| Dimensions | 1.9"H x 7.7"W x 6.6"D (4.8 x 19.5 x 16.8 cm) |
| Weight | 2.9 lb. (1.3 kg) not including the power supply |
Write Your Own Review
- An advanced auto-rate algorithm automatically determines the best possible baud rate for each connection and sets up the extender without the need for user interface.
- The unit has a built-in MDI-X switch, so it'll work with either a straight-through cable or a crossover cable
- Plug-and-play! Just plug it in, power it on, and it's up and running.
- This kit includes a pair of auto-rate Ethernet extenders, using a standard 2-wire connection, which simplifies your life and provides cost-effective network extension by enabling you to make the most of your pre-existing twisted-pair infrastructure.
- You'll be able to connect remote LANs across distances and at speeds previously unheard of. An auto-rate feature ensures that you achieve the highest possible speed on each connection.
- Extend your Ethernet connections, and get the best combination of speed and distance available. Four Ethernet ports enable you to make up to four 10-/100-Mbps connections easily.
- Support QoS, CoS, and VLAN: Ensure mission-critical network connections are of top quality with advanced traffic management features.
- A built-in console port makes setup a snap. And you can also use the embedded HTTP/SNMP agent to remotely manage the unit from anywhere in the world.
| Approvals | CE, RoHS |
| Compliance | FCC Part 15A; EMC Directive 89/336/EEC; Low-Voltage Directive 73/23/EEC |
| Data Rate | 11.4 Mbps at 0.8 mi. (1.4 km), full-duplex maximum |
| Distance | 5.2 mi. (8.4 km) maximum |
| LAN Protocols | 802.1d transparent bridging; 2K MAC address learning bridge |
| Management Interface | Web-based GUI; CLI for local and console access; password protected; SNMPv1/v2 (RFC 1157/1901/1905) agent and MIB (RFC 1213/1493; software upgradable via Web browser / TFTP |
| Modulation | TC-PAM 32; 16 |
| MTU Support | 1792 bytes |
| Operation | Ethernet: Full- or half-duplex |
| QoS Support | Rate limiting, rule-based/port-based; traffic classification based on port/802.1p/DSCP; WRR (weighted round robin)/SPQ (strict priority queueing) scheduling algorithm |
| VLAN Support | IEEE 802.1q VLAN Tagging; Port-based VLAN, up to 4000 VLANs. VLAN Stacking (Q-in-Q) |
| Interface | Ethernet: 10BASE-T/100BASE-TX |
| Connectors | (4) 8-position shielded RJ-45 Ethernet; Local/remote interconnect link: (1) shielded RJ-45; Management: Web: (1) shielded RJ-45; console: (1) shielded RJ-45; Power: (1) Universal Input (UI); Link: (1) 10BASE-T/100BASE-TX, autosensing, with half- or full-duplex operation |
| Indicators | Power, Alarm, Diagnostic, (4) WAN link, (4) Ethernet Link; (4) Ethernet 100M |
| Environmental | Operating temperature: +32 to +122° F (0 to 50° C); Storage temperature: -40 to +185° F (-40 to +85° C); |
| Power | 90-240 VAC, 50-60 Hz, universal |
| Dimensions | 1.9"H x 7.7"W x 6.6"D (4.8 x 19.5 x 16.8 cm) |
| Weight | 2.9 lb. (1.3 kg) not including the power supply |
Write Your Own Review
Related Products By Brand
Racks & Enclosures
APC 1U 19 Black Modular Toolless Airflow Management Blanking Panel AR8136BLK200
€0.00
Our site uses cookies and other technologies in order to optimize the website and for continuous improvement.
You agree to the usage of cookies when you continue using this site. For more information visit our privacy policy.
